Site-to-Site IPSEC VPN Between Two Cisco ASA – one with Dynamic IP

isco ASA 5500 Series appliances deliver IPsec and SSL VPN, firewall, and several other networking services on a single platform. Cisco ASA 5520, a member of the Cisco ASA 5500 Series, is shown in Figure 1 below.

Figure 1 Cisco Adaptive Security Appliance (ASA)

How To: Emulate Cisco ASA in GNS3

In this article, I will show you how to emulate Cisco ASA using Qemu. Once again, please note that ASA is not provided and will not be. So please don’t ask. Also be aware that ASA does not 100% work in Qemu but that’s enough to play with it.

Installation
First compile and patch Qemu as you would do for running JunOS. This will give us pcap, lcap and UDP tunnels (i.e. GNS3/Dynamips connections) capabilities.
Then obtain ASA itself. If you are smart and patient you will find it. I used asa802-k8.bin for my installations. As far as I know, nobody has been able to run ASA > version 8.2 (ASA keeps rebooting).
The next step is to get an initrd and a Linux kernel (inside the initrd) from your ASA image to use them with Qemu and also fix the initrd for our needs. The initrd is zipped and archived in the ASA image, we have to extract it.
There are 2 ways, manually or using a tool I created.

Manual method

Create an hexadecimal dump of your image:

hexdump -C asa802-k8.bin > asa802-k8.hex

Search for the ZIP header:

grep “1f 8b 08 00 1d” asa802-k8.hex 001228b0 1f 8b 08 00 1d 3d 73 46 00 03 ec 3a 6d 54 14 57 |…..=sF…:mT.W|

We can see that the ZIP file starts at offset 1228b0.

Let’s find the image size:

ls -la asa802-k8.bin -rwxr-xr-x  1 root  staff  14524416 26 Nov 20:14 asa802-k8.bin 14524416 bytes.

Now we need to find out where in the file we can start extracting the ZIP part.

echo "14524416 ; ibase=16 ; last - 1228B0" | bc | tail -n 1 13334352

Extract the zipped part of the ASA image:

tail -c 13334352 asa802-k8.bin > asa802-k8.gz

Decompress it with gzip:

gzip -d asa802-k8 gzip: asa802-k8.gz: decompression OK, trailing garbage ignored

Make a temp directory and go into it so we can extract the files contained in the uncompressed archive file (the initrd):

mkdir tmp ; cd tmp

Now extract the archive with cpio (you must have the administrator rights to successfully extract device files).

cpio -i --no-absolute-filenames --make-directories < ../asa802-k8

Copy the Linux kernel to your previous directory:

cp vmlinuz ../asa802-k8.kernel

Before compressing back the initrd, create the following script in asa/scripts/first_start.sh
This script formats the 256 MB flash on first start to be used by ASA. Loads the network drivers modules for Intel e100 (i82559er in Qemu) and Intel e1000 cards and activates the network interfaces to be used in ASA. I noticed that if we immediately start ASA after this first boot, it freezes (don’t really know why but it seems the system do something and slow down during the first minute …). The next time you start the system, the script will still load the activate the network interfaces and automatically start ASA.

#!/bin/sh   ## ## Author: Jeremy Grossmann (2009) ## Contributor: J. Pedro Flor (28 january 2010) ##   FIRST_START=no if test ! -e /mnt/disk0/lina_monitor then cd /asa/scripts/ echo "d" > /asa/scripts/fdisk.pf.in echo "o" >> /asa/scripts/fdisk.pf.in echo "n" >> /asa/scripts/fdisk.pf.in echo "p" >> /asa/scripts/fdisk.pf.in echo "1" >> /asa/scripts/fdisk.pf.in echo "1" >> /asa/scripts/fdisk.pf.in echo ""  >> /asa/scripts/fdisk.pf.in echo "t" >> /asa/scripts/fdisk.pf.in echo "4" >> /asa/scripts/fdisk.pf.in echo "w" >>/asa/scripts/fdisk.pf.in   echo "" echo -n "Initializing partition..." /sbin/fdisk /dev/hda < /asa/scripts/fdisk.pf.in > /dev/null 2> /dev/null echo "done"   echo "" echo -n "Formating and mounting partition..." mkdosfs -F 16 /dev/hda1 > /dev/null 2> /dev/null mount -t vfat -o umask=0000,noatime,check=s,shortname=mixed /dev/hda1 /mnt/disk0 > /dev/null 2> /dev/null echo "done" echo ""   cp /asa/bin/lina /mnt/disk0/lina cp /asa/bin/lina_monitor /mnt/disk0/lina_monitor FIRST_START=yes fi   # load drivers modprobe e100 modprobe e1000 ifconfig eth0 up ifconfig eth1 up ifconfig eth2 up ifconfig eth3 up ifconfig eth4 up ifconfig eth5 up   if test $FIRST_START = yes then echo "" echo "          Cisco ASA with Multiple Security Contexts" echo "          ==============================================" echo "" echo "This is your first boot, please wait about 2 minutes for 'disk0' creation" echo "and then execute the following commands inside the Linux prompt:" echo "" echo " # cd /mnt/disk0" echo " # /mnt/disk0/lina_monitor" echo "" echo "" echo "" echo "Please note to use the following command under ASA to save your configs:" echo "" echo " ciscoasa(config)# boot config disk0:/.private/startup-config" echo " ciscoasa(config)# copy running-config disk0:/.private/startup-config" echo "" echo "" echo "" echo "To get webvpn working, execute the following commands:" echo "" echo " ciscoasa# mkdir disk0:/var" echo " ciscoasa# mkdir disk0:/var/log" echo " ciscoasa# mkdir disk0:/csco_config" echo " ciscoasa# mkdir disk0:/csco_config/97" echo " ciscoasa# mkdir disk0:/csco_config/97/webcontent" echo "" echo "          ( Powered by Pedro Flor )" echo "          ( pedro.flor@gmail.com  )" echo "" exit fi   echo "" echo "" echo "Starting Cisco ASA with Multiple Security Contexts..." echo ""   cd /mnt/disk0 /mnt/disk0/lina_monitor

In order for the script to be loaded at startup, edit etc/init.d/rcS and change /asa/bin/lina_monitor by /asa/scripts/first_start.sh

Change first_start.sh permissions:

chmod 755 first_start.sh

Now you can compress all the file and have the initrd ready to use in Qemu:

find . | cpio -o -H newc | gzip -9 > ../asa802-k8.initrd.gz

Automated extraction method

TODO

Using ASA with Qemu

Create a FLASH (this is a virtual hard disk).

qemu-img create FLASH 256M

Then you can start Qemu.

qemu -hda FLASH -kernel asa802-k8.kernel -hdachs 980,16,32 \ -initrd asa802-k8.initrd.gz -m 512 -no-kqemu -nographic -append \ "console=ttyS0,9600n8 hda=980,16,32 bigphysarea=16384 auto nousb ide1=noprobe"

TODO: networking of ASA. Very similar with JunOS emulation.

Using ASA with GNS3

To be completed:

In Preferences -> Qemu -> Qemuwrapper section:

Set the path to Qemuwrapper (can be found in the GNS3 package)

Set the working directory (e.g. /tmp).

Set the path to your patched Qemu in “Path to Qemu”

In ASA section:

Set the paths to your initrd and kernel.

Drag and Drop an ASA symbol on the scene, start the firewall and telnet to it.

Appendix D: special note about Cisco PIX firewall

In order to make Aastra phones work outside a Cisco PIX firewall to the Asterisk server inside the firewall, we needed to remove fixup protocol sip 5060, and fixup protocol sip udp 5060 which are both enabled by default.

no fixup protocol sip 5060
no fixup protocol sip udp 5060

Site To Site ( Ipsec VPN ) in Fortigate firewall

Site to site ( Ipsec) VPN in fortigate firewall.