MPLS: OSPF sham-links

Introduction
The provider’s MPLS cloud has three routers namely – R1 (P-router), R2 (PE-R2) and R3 (PE-R3). These routers formed OSPF adjacency with one another. R2 and R3 are iBGP neighbors peering with each other’s loopback address.
The TTL propagation within the MPLS cloud was suppressed with no mpls ip propagate-ttl command. This is to “hide” the number of mpls routers that exist within the provider’s MPLS core.
Reason to use ospf sham link
It is possible that customer’s network has an OSPF backdoor link to each other despite subscribing MPLS service which links customer’s edge routers.

R4 and R5 has OSPF backdoor link between them.

The OSPF link through the MPLS cloud would be an inter-area link despite both site-a and site-b links are in OSPF area 0, this poses a problem if customer wants traffic to traverse from site-a to site-b or vice versa through the MPLS core. OSPF will prefer the intra-area route, in this case is the backdoor link which resides in the same OSPF area, to reach the destination.
To solve this problem, OSPF sham link is used.

Steps to configure OSPF sham link
The OSPF sham link is only created at the PE-routers, the operation is transparent to customer.
1. Create a loopback address, assign a VRF instance and assign a /32 mask IP address.

1 2 3 4 5

! interface Loopback20  ip vrf forwarding site-a  ip address 20.20.20.20 255.255.255.255 !

Step 2: Advertise the vrf loopback address into BGP vrf instance.

1 2 3 4 5 6 7 8 9 10

router bgp 65000 ...... !  address-family ipv4 vrf site-a   redistribute ospf 2 vrf site-a   no synchronization   network 20.20.20.20 mask 255.255.255.255  exit-address-family ! ......

Step 3: Create another OSPF process, attached to a VRF instance and insert the area x sham-link command.

1 2 3 4 5 6 7

! router ospf 2 vrf site-a  log-adjacency-changes  area 0 sham-link 20.20.20.20 30.30.30.30  redistribute bgp 65000 subnets  network 192.168.0.13 0.0.0.0 area 0 !

Verify OSPF sham-link
If OSPF sham-link is successful you will see this syslog message:
*Mar 1 00:01:16.643: %OSPF-5-ADJCHG: Process 2, Nbr 30.30.30.30 on OSPF_SL0 from LOADING to FULL, Loading Done
You can see OSPF adjacency is formed between the OSPF sham-link by using show ip ospf neighbor command.

1 2 3 4 5 6 7 8

R2#show ip ospf neighbor   Neighbor ID     Pri   State           Dead Time   Address         Interface 3.3.3.3           0   FULL/  -        00:00:32    192.168.0.10    Serial0/1 1.1.1.1           0   FULL/  -        00:00:30    192.168.0.1     Serial0/0 192.168.0.21      1   FULL/DR         00:00:30    192.168.0.14    FastEthernet1/0 30.30.30.30       0   FULL/  -           -        30.30.30.30     OSPF_SL0 R2#

You can verify sham-link status by using show ip ospf sham-links command.

1 2 3 4 5 6 7 8 9 10 11 12 13

R2#show ip ospf sham-links Sham Link OSPF_SL0 to address 30.30.30.30 is up Area 0 source address 20.20.20.20   Run as demand circuit   DoNotAge LSA allowed. Cost of using 1 State POINT_TO_POINT,   Timer intervals configured, Hello 10, Dead 40, Wait 40,     Hello due in 00:00:06     Adjacency State FULL (Hello suppressed)     Index 2/2, retransmission queue length 0, number of retransmission 0     First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)     Last retransmission scan length is 0, maximum is 0     Last retransmission scan time is 0 msec, maximum is 0 msec R2#

the flow of the command is area area number sham-links source ip address destination ip address
The CE router will prefer the route towards the PE-router.

1 2 3 4 5 6 7 8 9 10 11 12

R4#sh ip route | beg Gate Gateway of last resort is not set        20.0.0.0/32 is subnetted, 1 subnets O E2    20.20.20.20 [110/1] via 192.168.0.13, 00:02:40, FastEthernet1/0      192.168.0.0/30 is subnetted, 3 subnets C       192.168.0.12 is directly connected, FastEthernet1/0 O       192.168.0.16 [110/3] via 192.168.0.13, 00:02:30, FastEthernet1/0 C       192.168.0.20 is directly connected, FastEthernet2/0      30.0.0.0/32 is subnetted, 1 subnets O E2    30.30.30.30 [110/1] via 192.168.0.13, 00:02:37, FastEthernet1/0 R4#

As seen from CE router’s routing table to reach site-b from site-a, CE site-a router prefers the route via the PE-router (192.168.0.13).
The E2 routes are vrf loopback interfaces of PE-routers use for sham-links, these routes are E2 because they are redistributed in OSPF vrf instance.

1 2 3 4 5 6 7

! router ospf 2 vrf site-b  log-adjacency-changes  area 0 sham-link 30.30.30.30 20.20.20.20  redistribute bgp 65000 subnets  network 192.168.0.17 0.0.0.0 area 0 !

From CE site-a traceroute:

1 2 3 4 5 6 7 8 9

R4#traceroute 192.168.0.18   Type escape sequence to abort. Tracing the route to 192.168.0.18     1 192.168.0.13 116 msec 56 msec 20 msec   2 192.168.0.17 92 msec 48 msec 20 msec   3 192.168.0.18 104 msec *  132 msec R4#

192.168.0.13 is the PE-R2 router, 192.168.0.17 is the PE-R3 router and finally the 192.168.0.18 is the destination CE site-b router.
Entire lab configurations

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425

################ R1 is P router # ################ ! ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 ip cef ! ! ! ! no ip domain lookup ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive  log config   hidekeys ! ! ! ! ! ! ! ! interface Loopback0  ip address 11.11.11.11 255.255.255.255 ! interface FastEthernet0/0  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/0  bandwidth 2000  ip address 192.168.0.1 255.255.255.252  mpls ip  clock rate 2000000 ! interface FastEthernet0/1  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/1  bandwidth 2000  ip address 192.168.0.5 255.255.255.252  mpls ip  clock rate 2000000 ! interface Serial0/2  no ip address  shutdown  clock rate 2000000 ! router ospf 1  router-id 1.1.1.1  log-adjacency-changes  passive-interface default  no passive-interface Serial0/0  no passive-interface Serial0/1  network 11.11.11.11 0.0.0.0 area 0  network 192.168.0.1 0.0.0.0 area 0  network 192.168.0.5 0.0.0.0 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! line con 0  exec-timeout 0 0  logging synchronous line aux 0 line vty 0 4 ! ! end   ############ R2 is PE-R2# ############ ! ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 ip cef ! ! ! ! ip vrf site-a  rd 2.2.2.2:2  route-target export 2:2  route-target import 3:3 ! no ip domain lookup ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive  log config   hidekeys ! ! ! ! ! ! ! ! interface Loopback0  ip address 22.22.22.22 255.255.255.255 ! interface Loopback20  ip vrf forwarding site-a  ip address 20.20.20.20 255.255.255.255 ! interface FastEthernet0/0  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/0  bandwidth 2000  ip address 192.168.0.2 255.255.255.252  mpls ip  clock rate 2000000 ! interface FastEthernet0/1  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/1  bandwidth 2000  ip address 192.168.0.9 255.255.255.252  mpls ip  clock rate 2000000 ! interface Serial0/2  no ip address  shutdown  clock rate 2000000 ! interface FastEthernet1/0  ip vrf forwarding site-a  ip address 192.168.0.13 255.255.255.252  duplex auto  speed auto ! interface FastEthernet2/0  no ip address  shutdown  duplex auto  speed auto ! router ospf 2 vrf site-a  log-adjacency-changes  area 0 sham-link 20.20.20.20 30.30.30.30  redistribute bgp 65000 subnets  network 192.168.0.13 0.0.0.0 area 0 ! router ospf 1  router-id 2.2.2.2  log-adjacency-changes  passive-interface default  no passive-interface Serial0/0  no passive-interface Serial0/1  no passive-interface Loopback0  network 22.22.22.22 0.0.0.0 area 0  network 192.168.0.2 0.0.0.0 area 0  network 192.168.0.9 0.0.0.0 area 0 ! router bgp 65000  no synchronization  bgp log-neighbor-changes  neighbor 33.33.33.33 remote-as 65000  neighbor 33.33.33.33 update-source Loopback0  no auto-summary  !  address-family vpnv4   neighbor 33.33.33.33 activate   neighbor 33.33.33.33 send-community extended  exit-address-family  !  address-family ipv4 vrf site-a   redistribute ospf 2 vrf site-a   no synchronization   network 20.20.20.20 mask 255.255.255.255  exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! line con 0  exec-timeout 0 0  logging synchronous line aux 0 line vty 0 4 ! ! end   ############ R3 is PE-R3# ############ ! ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 ip cef ! ! ! ! ip vrf site-b  rd 3.3.3.3:3  route-target export 3:3  route-target import 2:2 ! no ip domain lookup ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive  log config   hidekeys ! ! ! ! ! ! ! ! interface Loopback0  ip address 33.33.33.33 255.255.255.255 ! interface Loopback30  ip vrf forwarding site-b  ip address 30.30.30.30 255.255.255.255 ! interface FastEthernet0/0  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/0  bandwidth 2000  ip address 192.168.0.6 255.255.255.252  mpls ip  clock rate 2000000 ! interface FastEthernet0/1  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/1  bandwidth 2000  ip address 192.168.0.10 255.255.255.252  mpls ip  clock rate 2000000 ! interface Serial0/2  no ip address  shutdown  clock rate 2000000 ! interface FastEthernet1/0  ip vrf forwarding site-b  ip address 192.168.0.17 255.255.255.252  duplex auto  speed auto ! interface FastEthernet2/0  no ip address  shutdown  duplex auto  speed auto ! router ospf 2 vrf site-b  log-adjacency-changes  area 0 sham-link 30.30.30.30 20.20.20.20  redistribute bgp 65000 subnets  network 192.168.0.17 0.0.0.0 area 0 ! router ospf 1  router-id 3.3.3.3  log-adjacency-changes  network 33.33.33.33 0.0.0.0 area 0  network 192.168.0.6 0.0.0.0 area 0  network 192.168.0.10 0.0.0.0 area 0 ! router bgp 65000  no synchronization  bgp log-neighbor-changes  neighbor 22.22.22.22 remote-as 65000  neighbor 22.22.22.22 update-source Loopback0  no auto-summary  !  address-family vpnv4   neighbor 22.22.22.22 activate   neighbor 22.22.22.22 send-community extended  exit-address-family  !  address-family ipv4 vrf site-b   redistribute ospf 2 vrf site-b   no synchronization   network 30.30.30.30 mask 255.255.255.255  exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! line con 0  exec-timeout 0 0  logging synchronous line aux 0 line vty 0 4 ! ! end   ################# R4 is CE site-a # ################# ! ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R4 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 ip cef ! ! ! ! no ip domain lookup ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive  log config   hidekeys ! ! ! ! ! ! ! ! interface FastEthernet0/0  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/0  no ip address  shutdown  clock rate 2000000 ! interface FastEthernet0/1  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/1  no ip address  shutdown  clock rate 2000000 ! interface Serial0/2  no ip address  shutdown  clock rate 2000000 ! interface FastEthernet1/0  ip address 192.168.0.14 255.255.255.252  duplex auto  speed auto ! interface FastEthernet2/0  ip address 192.168.0.21 255.255.255.252  ip ospf cost 100  duplex auto  speed auto ! router ospf 1  log-adjacency-changes  network 192.168.0.14 0.0.0.0 area 0  network 192.168.0.21 0.0.0.0 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! line con 0  exec-timeout 0 0  logging synchronous line aux 0 line vty 0 4 ! ! end   ################ R5 is CE site-b# ################ ! ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R5 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 ip cef ! ! ! ! no ip domain lookup ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive  log config   hidekeys ! ! ! ! ! ! ! ! interface FastEthernet0/0  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/0  no ip address  shutdown  clock rate 2000000 ! interface FastEthernet0/1  no ip address  shutdown  duplex auto  speed auto ! interface Serial0/1  no ip address  shutdown  clock rate 2000000 ! interface Serial0/2  no ip address  shutdown  clock rate 2000000 ! interface FastEthernet1/0  ip address 192.168.0.18 255.255.255.252  duplex auto  speed auto ! interface FastEthernet2/0  ip address 192.168.0.22 255.255.255.252  ip ospf cost 100  duplex auto  speed auto ! router ospf 1  log-adjacency-changes  network 192.168.0.18 0.0.0.0 area 0  network 192.168.0.22 0.0.0.0 area 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! line con 0  exec-timeout 0 0  logging synchronous line aux 0 line vty 0 4 ! ! end